📄️ Ping
Retrieves a RNS serial number as proof of life.
📄️ Change Button Number
Sets a new joystick button number to an encoder center push-button connector. Each encoder pair has a center push-button that can be mapped by J-PORT. These push-buttons can be assigned to any joystick button number between 1 and 200. They are internally connected via a virtual connector. There are four of these with the following connector numbers:
📄️ Hard Reset
Issues a hard-reset instruction to the RNS. All settings are restored to factory defaults. The
📄️ Report Frequencies
Reports all frequencies. Returns NAV, COMM and ADF frequencies in bulk.
📄️ Report XPDR Squawk Code
Returns the transponder squawk code value
📄️ Set Active Frequency
Sets the active frequency of an instrument.
📄️ Set Backlit Color
Sets the Backlit color. This will change the RGBW color settings of the Backlit
📄️ Set Decimal Increment
Sets the decimal part step increment/decrement for a frequency of the COMM, NAV
📄️ Set Display Luminosity
Sets the displays luminosity. It ranges from 0 to 10.
📄️ Set Integer Increment
Sets the integer part step increment/decrement for a frequency of the COMM, NAV and
📄️ Set LED Backlit Color
Sets the color of an individual Backlit LED. This will change the RGBW color settings of this LED.
📄️ Set Maximim Frequency
Sets the maximum frequency of a COMM, NAV or ADF instrument. For ADF, the 5th and 6th digits
📄️ Set Minimum Frequency
Sets the minimum frequency of a COMM, NAV or ADF instrument. For ADF, the 5th and 6th digits
📄️ Set Standby Frequency
Sets the standby frequency of an instrument. ADF does not have a standby frequency. However, if it
📄️ Set XPDR Decimal Increment
Sets the transponder decimal increment, i.e., the lower two digits. When the maximum decimal
📄️ Set XPDR Integer Increment
Sets the transponder integer increment, i.e., the upper two digits. When the maximum integer value
📄️ Set XPDR Maximum Squawk
Sets the transponder maximum squawk code value. Can be set from 0 to 9999.
📄️ Set XPDR Minimum Squawk
Sets the transponder minimum squawk code value. Can be set from 0 to 9999.
📄️ Set XPDR Squawk Code
Sets the transponder squawk code value
📄️ Soft Reset
Issues a soft-reset instruction to the RNS. All settings are restored to factory defaults. The